- Menu
-
- English
Views: 69 Author: Site Editor Publish Time: 2022-04-29 Origin: Site
When the wiring cabinet has to be installed in the common area or borrowed from other departments of space, should strengthen the strength of the cabinet shell, closed cabinet external holes (waterproof), try not to use the glass door (to prevent accidental shattering injury), the use of special locks / keys, to ensure that the cabinet power can achieve uninterrupted power supply. In short, to make the cabling system in the cabinet and and network equipment will not stop working due to external reasons, resulting in interruption of information transmission in the area under its jurisdiction.
1, the use of wire frame. Weak electrical cabinet alignment frame is actually a 1U or 1SU sheet metal parts with N teeth, the length of the teeth are long and short, depending on the size of the network equipment and the use of cable turning radius.
2, the use of wire bridge alignment. The so-called line bridge is a small bridge-like radius molding structure protruding in the cabinet. Can be understood as the cabinet board projection can be tied on the place it. General bridge will appear in the following places: cabinet compartment partition, column, the installation of equipment panel square hole strip and other places.
3, The use of winding reels in the weak motor cabinet alignment. This is the same as the alignment frame, generally used for communication equipment on the fiber finishing.
4. Flexible use of into the (go) line cylinder. The so-called into (go) line cylinder, refers to the different compartments in the need for alignment, compartment partitions on the alignment of the place. Generally, the inlet (go) barrel appears in two compartments that need to be isolated from each other, such as between the equipment compartment and the battery compartment.
5. The use of ties and labels. This method belongs to the weak power room cabinet alignment method in the basic method, tie use easy and flexible, while the label makes the alignment after easy to identify, reduce the difficulty of maintenance.
The above is all about the weak power room cabinets, I hope to give you some help. In fact, in the wiring of the server room cabinet, skilled and flexible grasp of the above, I believe that in the integrated wiring, finishing lines, will achieve twice the result with half the effort.
